WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Monday, October 19, 2015

Crustacean creation complete

Painting the crab submersible was fun from beginning to end. I began with two base coats of gold. Then I did a blend coat with the gold on the bottom and a blend to a deep red on the top. The model instantly came to life.



Once the preliminary colours had a chance to dry thoroughly I started in with the glazes. I started with the bottom of the model. Because I was working alone and the complexity of the shapes I decided to use a small spray gun to apply the glaze in a hurry. Once I had applied the glaze I judiciously wiped it off with a soft towel. Then I worked my way upwards to the top of the piece, first spraying on the glaze and then wiping it off with the towels.  


Once the submersible was done I put the model under the fans to cure. Then multiple coats of taupe paint were slathered on the base and then allowed to dry. A green algae was then sponged on in a random fashion, primarily around the rocks.  Then it was back under the fans before another spray of dark glaze. Once the glaze was dry I applied a some gold dry brush for a little bling and sparkle.