I took a screen capture and then after adding another layer in Adobe Photoshop and a big fat, sift brush I quickly drew the outline. I kept in mind that black would do nothing, white would raise up the most and grays would do less, depending on its value.
Then I deleted the screen capture of the vector and saved the bitmap I had created. This would be imported it into EnRoute and sized and positioned it over the vectors a little later.
Then I selected the vector and created a flat relief.
Then I used the oval vector to modify the leaf relief with the dome tool.
The bitmap I had created earlier was then imported and positioned over the leaf shape. I used a .75" value in the parameters which meant it bowed up the white .75"
Combined with the previous dome shape it was looking pretty fine - and tropical already.
The stem relief was created next with the dome tool and this was modified with the oval vector and then nudged to the right height. The lettering outline was next, first as a flat relief and then modified with the oval. Lastly the oval vector was used to create a plaque for the background.I used the bevel tool but limited the height to make a bevelled edge. Everything was merged highest before I added the slightly domed lettering.
Then at last it was time to carve the piece from the 30 lb Precision Board. I was pleased with the result!
-dan
