Work continues on many fronts on the Fox & Hounds pub project. Today the outside entry received the final coats of base paint, leaving the glazes to be done tomorrow. In the ladies washroom the last of the welded rusty steel stall dividers was installed today. With the bulk of the welding done it was time to do one last task before that equipment goes home once more at long last. The primary task fo today was to weld up the framework for the thick vines.
It is my bet that at least one person will lean on, swing or climb on the vine in the next years. That means it needs to be sturdy. REAL STURDY. Anchor points were drilled into the floor to anchor the base. I bent and positioned a single rod for each vine from the ground, then screwed in heavy lag bolts at key points ensuring the vines will grow for many years to come. The vines intertwine around the brick post and wander up to the beam above, then down towards the beer dispenser below. A video screen will be mounted to the end, positioned perfectly for reference of the bar tender to access.
The next step will be to wrap the welded armature with diamond lath and then using sculpting epoxy to form the weathered and twisted grape vine. Stay tuned for progress.
-dan
