WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Thursday, September 22, 2011

Layer after layer of color

The Paul family crest for the Fox & Hounds Pub is coming along nicely. Yesterday we laid on the Coastal Enterprises primer, adding a little more texture with a small brush to the scroll, edge of the shield, crown and the letter 'P'. This was allowed to dry before we painted the base color of a nice warm cream on the scroll and wood grain background. The shield received a metallic red. The outside border received a brown paint.


Today I added the gold to the fox & hound. Then it was time to start the first of the glazes. The shield received a purply red color. The wood and scroll got a yellowish tan for it's first pass of glazes. Both glazes were gently wiped down to allow the under color to shine through. 


Tomorrow I'll start in on the next glazes. working up from the lightest color to the darkest, gradually including more and more of the crest. By the time I am done it will look like it is 200 year old - just like the story we are telling. By carefully designing the project with lots of texture the painting process is relatively quick - less than two hours in total.

 - Stay tuned...

-dan