WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Wednesday, August 21, 2013

Lock it up

One of the early signs I did just after getting my router was a giant padlock for the lockers at a mini golf at Mall of America.The sign was to mount to a wall.  I decided to weld the bracket right into the interior structure. The padlock shackle was a 2" pipe bent into a 'U'. It would be plenty strong to be sure. The sign faces were routed in layers from 30 lb Precision Board. I then glued them up with the steel frame in the middle using .



Once the layers were all glued up it was time for paint.


I added a little extra texture with the heavy bodied primer from Coastal Enterprises. Once the base coats were done I added a layer of glaze to age it down a little. I decided I liked it so much I made a second one as a display piece in my studio.


-dan