It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.
Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan
Friday, March 21, 2014
Pedal Power Part 3
The pedal power sign is a good size and since I routed it with a 1/8" ball nose bit with an 80% overlap the two sides took about eight hours each to do. The pieces were cut from 1.5" thick 30 lb Precision Board. They turned out great! Tomorrow I'll cut the three half inch thick inner layers and then we'll be ready to start the final assembly.