WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Monday, December 22, 2014

First paint

It's not very often we paint our signs in pieces and then assemble afterwards. Most often, especially for outdoor projects I like to route in as few pieces as possible and then securely glue and fasten together before the painting process began.

In this case the piece will be displayed indoors. Compared to most pieces we build this one is fragile. The only way to realistically paint it was to do the bulk of it separately and then assemble before finishing the outside surfaces. As each piece came off the MultiCam today I did a little finishing handwork and then test fit everything. Then all of the inside surfaces got their first coat of paint.


Tomorrow I'll add more coats before adding some glazes and then assembly will take place. Stay tuned...

-dan
Posted by at