WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Monday, March 14, 2016

Five more and the painting begins

The name plaques are all making their way through the painting process now. Craig's is the last one raw off the router. Because we use 30 lb Precision Board priming isn't necessary.


Over the next while I'll be posting some progress shots of how the name plaques come alive through the painting steps. Even though pricing is not necessary we still do it to ad some subtle texture. The secret of course is to use Coastal Enterprises thick bodied FSC-88 WB primer. WB stands for water base. We brush it on. Generally we have two gallons of primer on the go. As we work our way down into the first gallon it tends to get real thick - like sour cream. This is perfect for adding texture with a brush. The second gallon is a fresh one, which brushes out nice and smooth when we need it.


Those small bumps and ridges on the edges of your CNC cuts are easily smoothed out with the primer. They recommend (and we do too) that we put the pieces under a fan for a couple of hours to drive out the moisture.



Then when the primer has cured it is time for the base colours. We always triple coat and use a top quality acrylic house paint. We allow it to dry between coats, most often with a fan blowing on the piece.



Stay tuned for more progress shots as the glazes go on.