WELCOME!


It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated with what I saw and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one - but I just knew it could do fantastic stuff.

Through extensive research and LOTS of hands-on practice I quickly found out that my MultiCam router was capable of just about anything imaginable.This journal will chronicle that journey to date and continue each week with two or three entries as I continue to explore just what is possible with this wonderful tool... -dan

Wednesday, November 29, 2017

More signs at Skallywag Bay


There were a whole lot of signs which we did for Skallywag Bay in Trinidad and I'e been itching to get them installed for quite some time. During my last visit to the site we got almost all of the larger pieces placed around the site. We did it using a 60' zoom boom which is a very handy machine. I have my forklift licence for our little machine at the shop but the larger machine was a whole new experience! The key is to go slow and easy. Every move is amplified when the boom is fully extended and to reach these pieces we did just that most of the time.


The sign posts will have heavy rope work installed at a later point by someone who knows how to braid the rope and tie the proper knots.




The soil will be put into the planters around the base of the signs and the greenery will soften the look and make the signs blend better into the picture.